50mm Motor 12v24V Micro Power Speed Control Motor CW CCW High Speed Low Noise Motor(12V 3000RPM,Only Motor)

Permanent Magnet Motors50mm Motor 12v24V Micro Power Speed Control Motor CW CCW High Speed Low Noise MotorAttention:1. Before use, confirm that the motor voltage is correct. If it is a motor, also confirm whether the power supply current is sufficient2. Overloading is not allowed. There are two main reasons for overloading: and shaft force. The load cannot exceed the rated of the motor, and the shaft force cannot exceed the axial and radial allowable forces of the shaft. After adding a load, the measured current of the motor cannot be rated. Generally, motors must be equipped with fuses to avoid overloading and burning the motor.3. Do not store or operate in high temperature or humid environments, and do not place it in corrosive gas, as it may reduce the effectiveness of the motor4. When assembling transmission components such as gears and pulleys on the motor shaft, do not hit them abnormally when pressing them in5.When soldering the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron should be around 340 ° C and the heating time should be within 3 seconds. The plastic should not be deformed. During operation, the soldering points should flow into the motor or the end of the wire should be broken, which will cause the motor's function to deteriorate6. When installing the motor, pay attention to whether the screws are too long to prevent them from touching the parts inside the motorOnly Motor :Motor*1pcMotor and Bracket :Motor*1pc and Bracket*1pc==========Usage : Home ApplianceModel Number : WS-50ZYT91-RConstruction : Permanent MagnetType : Gear MotorProtect Feature : Drip-proofCommutation : Brush

• Permanent Magnet Motors
• 50mm Motor 12v24V Micro Power Speed Control Motor CW CCW High Speed Low Noise Motor